Resistive load bank from 50 kW to 2.4 MW

Rentaload offers for rent a wide range of resistive load banks ranging from 50 kW to 2.4 MW : 50 kW, 100 kW, 200 kW, 300 kW, 500 kW, 600 kW, 2.4 MW…

A modular range that offers load banks on wheels, on a trailer or on a flatbed. It is ideal for testing generators, testing batteries or inverters (indoors and outdoors). Our equipment is also suitable for different sectors of activity: data centre, industrial, tertiary, maritime and naval, health and hospitals, etc.

Test reports can also be edited.

It is therefore up to you to choose the power you want (from 1 kW to several MW).

Advantages and features of resistive load banks from 50 kW to 2.4 MW

  • All-terrain range for indoor and outdoor tests;
  • Load banks adapted to different sectors of activity ;
  • Easily and quickly operational (small wheels, lifting ring and steel structure for fork passage);
  • Perfectly suited for testing generators , inverters or batteries;
  • Resolution from 1 kW to 10 kW depending on the selected banks.

Focus on the 2.4 MW Rentaload container

Rentaload offers a high-power load bank for rental: up to 2.4 MW. It is offered in state-of-the-art mode, with on a single flatbed-trailer (13.6 meters long and 2.5 meters wide):

  • A resistive load bank of 2.4 MW (230V-400V 3-phase / 50-60 Hz);
  • A storage container with all the signaling and site protection accessories;
  • Reels, for the cables associated with the load test project.

The trailer is parked near the installation to be tested. It can be moved to another location within the same site, by simple traction (service possible on request).

 

The advantages of this solution:

  • The guarantee of receiving all equipment and accessories in a single shipment;
  • Increased flexibility in booking and implementation;
  • Flexible installation on the destination site (no need for a crane or a powerful forklift).

This 2.4 MW container is used to test different power supplies. It simulates varying electrical load conditions, which can be measured and recorded accurately. It can be connected directly to your devices, to ensure that they will not fail at critical times.

Focus on the latest generation 650 kW resistive load banks

Our 650 kW resistive load banks offer a pleasant “plug-and- play solution, thanks to their powerlock cables. With easier and faster connections, you simplify your on-site installations and thus save valuable time.

These are SMART devices that can also operate in a connected version.

With their Rentalab supervision software, you can control your entire fleet of 650 kW load banks on site via a single computer. You can thus reach a total power of several MW if you wish (2.6 MW with 4 banks of 650 kW, for example). You can also send them instructions and collect extremely precise data during the tests (P/U/I).

Rentalab is also:

  • Programming of tests up to 72 hours (with different predefined scenarios);
  • Real-time plotting of supervision curves;
  • Retrieval of electrical information from your recipe;
  • Edition of test reports.

More information on our Rentalab and EkkoSense supervision software on the dedicated page: “Associated Services”.

Connection systems for resistive load banks from 50 kW to 2.4 MW

Rentaload adapts to your electrical configuration thanks to its different cables and connection boxes. We have different cable lengths and sections for our resistive load banks:

  • from 5m to more than 100m;
  • with sections from 50mm2 to 240mm2.

These are mainly thimble cables (10mm or 12mm). They provide three-phase connections between resistive load banks and your installations.

Technical table of resistive load banks from 50 KW to 2.4 MW

Type Values
Power 50kW to 2.4MW
Voltage 230V / 400V / Single / 3-phase
Resolution 1kW
Notches Cable HO7RNF
Food Power supply via busbars, possibility of external power supply
Finishing Aluminum
Mobility On wheels
Security Klixon temperature
Dimensions Height 700mm
Dimension Width 19 inches (410mm)
Dimension Depth 490mm

The different types of tests with resistive load banks from 50 kW to 2.4 MW

Electric chain test

You want to test your electrical chain, discover all the specificities of this type of test.

Cooling system test

You want to test your cooling system, discover all the specificities of this type of test.

Generator set test

You wish to test your generating set, discover all the specificities of this type of test.

Inverter test

You want to test your inverter, discover all the specificities of this type of test.

Battery test

You want to test your battery, discover all the specificities of this type of test.

IST Commissioning test

Discover all the specifics of IST Commissioning tests for data centers.

Services associated with the rental of load banks

Support from A to Z

We offer a la carte services.

We can realize for you a turnkey service. She understands :

  • delivery of equipment on site,
  • their installations and connections,
  • assistance in carrying out your tests or the complete commissioning service.