Rack load bank connected 6 kW / 7 kW

With our 6 kW / 7 kW smart connected load banks , test all levels of electrical and thermal redundancy in your data centre (main path / secondary path and backup).

Collect data (P/U/I/Delta T) thanks to their supervision software and thus bring added value to your tests. Also take advantage of their low delta T to test your computer rooms in real conditions.

Our 19-inch rackmount load banks are specially designed to meet the requirements of data center “IST commissioning” tests. They are suitable for rooms that are newly built, at the end of renovation or undergoing maintenance.

Technical sheet of the 6 KW connected load bank

Data sheet of the connected load bank 7 kW

Benefits and features of the 6 kW / 7 kW connected load bank

  • Integrated ATS to switch the electrical load between channel A and channel B without having to disconnect and reconnect cables;
  • 50/50 load sharing (50% track A, 50% track B) for bench compatibility with “2N” type electrical infrastructures;
  • Low Delta T (adjustable) to be as close as possible to the real conditions of the operating room;
  • Feedback of measurements (P/U/I/Delta T) thanks to the supervision software of the connected load banks to give added value to your tests;
  • Management of up to 200 load banks at the same time via the supervision PC for time savings on tests estimated at around 20% by our customers;
  • Resolution of 0.5 kW for the 7 kW bench, the most accurate on the market.

Measurement feedback from the 6 kW / 7 kW connected load bank

Rentalab monitoring software

This software allows you to control the entire fleet of connected load banks deployed on site via a single computer. You can control up to 200 load banks at the same time. You can also collect extremely precise data such as P/U/I/DELTA T , during testing.

 

Rentalab is also:

    • Programming of tests up to 72 hours (according to different scenarios);
    • Real-time plotting of supervision curves;
    • Recovery of thermal and electrical information from your tests;
    • Edition of test reports.

EkkoSense supervision software

This software allows you to model your computer room in 3D. You can therefore navigate in your room, while collecting thermal data thanks to various wireless temperature sensors positioned in the IT room.

The deployment of this solution includes:

      • Temperature and humidity sensors;
      • An EkkoHub;
      • A 3G connection panel;
      • And all the associated connections, configuration and modeling.

Conclusion

Two different but complementary software programs that allow you to:

      • Save time in carrying out your tests (up to 20% according to feedback from our customers);
      • Bring real added value to your tests . The data collected during the tests provide a real “vital map” of the data centre before its first commissioning.
      • Differentiate yourself from your competitors by enhancing this test phase and providing valuable data for the future management of the datacenter.

Our instrumentation accessories for your 6 kW and 7 kW load bank

Rentaload also offers a number of instrumentation and measurement accessories for hire. They complete the data collected through the software.

      • Thermal camera to analyse the various hot spots in IT rooms;
      • Anemometer to analyse air speed;
      • Analysers to provide network information;
      • Temperature sensors to analyse computer room temperature;
      • Humidity sensors to analyse room humidity;
      • etc

These accessories can be rented independently or in addition to Rentalab and EkkoSense software, depending on your needs.

The temporary containment solution for the 6 kW / 7 kW connected load bank

Rentaload offers a temporary containment solution for data centres that do not yet have computer bays. This solution allows you to simulate hot/cold corridors and test the rooms as closely as possible to their subsequent configuration once urbanised.

This gives you the opportunity to test electrical infrastructure and air conditioning systems in parallel.

Our various service offers include the assembly / disassembly of these containment structures if necessary.

Do not hesitate to contact us for more information.

The 6 kW / 7 kW connected load bank or the future of data centres

Many companies offer standard rackmount load banks for rental. On the other hand, none offers connected SMART rack load banks, except Rentaload. However, they seem to be the future of data centres today!

Indeed, they allow you to:

      • Save time in carrying out your tests (up to 20% according to feedback from our customers) since you can control your entire fleet of load banks remotely via the “Rentalab” supervision software; you thus increase your chances of delivering your data centre without delay, which is a priority today;
      • To bring added value to your tests thanks to the data collected through the supervision software (P/U/I/Delta T).

 

These SMART and connected load banks allow you to perform reliable and optimised tests.

The data collected during the tests allow you to provide irrefutable proof to the owner of the building as to the “good functioning” of this one.

You bring him security and a guarantee in relation to the reliability and efficiency of his infrastructure, which today is essential for him. In other words, you save him from possible problems or even future breakdowns, which could be a waste of money and too much time for him.

This is therefore the whole point of SMART connected rack load banks in the data center industry!

Free and without contract

Technical table for the connected load bank 6 kW / 7 kW

Type Values
Power 6 kW (50-50% load sharing possible) 7kW
Voltage 230V – Single phase – 50/60 Hz 230 V – Single phase – 50/60 Hz
Resolution 1kW 0.5kW
Notches 4 notches: 2x1kW 2xkW 4 steps: 0.5/1/2/3.5 kW
Food Redundancy (channel A – channel B) Redundancy (channel A – channel B)
Mean Delta T°C Fixed or selectable between 9°C and 26°C Fixed or selectable between 9°C and 26°C
Ventilation Horizontal ventilation Horizontal ventilation
Security Temperature Indicator Temperature Indicator
Noise 85 Db 85 Db
Weight 20kg 17kg
Finishing Aluminum Epoxy Aluminum Epoxy

The different types of tests with 6 kW / 7 kW connected load banks

Electric chain test

You want to test your electrical chain, discover all the specificities of this type of test.

Cooling system test

You want to test your cooling system, discover all the specificities of this type of test.

IST Commissioning test

Discover all the specifics of IST Commissioning tests for data centers.

Free and without contract

Services associated with the rental of load banks

Support from A to Z

We offer a la carte services.

We can realize for you a turnkey service. She understands :

  • delivery of equipment on site,
  • their installations and connections,
  • assistance in carrying out your tests or the complete commissioning service.