3.5 MW / MVA AC load bank

Rentaload offers 3,550 kW or 3,500 kVA containerized load banks for rental. These are ideal for testing UPS systems and data center generators. The 3.5 MW / 3.5MVA AC load bank has been designed to test the ability of these systems to maintain a stable power supply over long periods, simulating realistic power failures to assess their reliability and back-up capability. This type of equipment is perfect for carrying out impact, scalability and endurance tests on your various power supplies and their redundancy.

Request 3.5MW / 3.5MVA AC Air Cooling datasheet

Ask for a personalised quote

Benefits and features of the 3550 kW / 3500 MVA load bank

Loading the next set of gallery items...

🗸 The electrical loads in a data center can vary considerably depending on the demand for IT equipment. With a 3.5 MW / 3.5MVA AC load bank, you can simulate different electrical loads to assess the ability of data center facilities to handle these load variations efficiently and without service interruption. 🗸 Switching devicest are used to guarantee continued service availability in the event of a failure. The 3.5MW / 3.5MVA AC load bank is required to test these redundancy and failover mechanisms by simulating controlled failures in order to verify the responsiveness and efficiency of backup systems, and then ensure continuity of service. 🗸 When commissioning new facilities or upgrading existing ones, it’s crucial to ensure that electrical systems operate as intended. Renting a 3.5 MW / 3.5MVA AC load bank is the ideal way to carry out comprehensive load tests, guaranteeing the reliability and performance of electrical equipment before the cleanroom is set up.

Connection of 3550 kW / 3500 kVA load banks

Powering 3550 kW / 3500 kVA containerized charge banks can require the installation of up to 42 power supply cables at maximum power. Connected by 240 mm² cables fitted with Powerlocks, the installation and connection of this type of charge bank involves time and manpower. Rentaload is able to support you with methodology and on-site manpower.

Accessories and additional services for 3550kW / 3500 kVA containerized load banks

Rentaload offers accessories, instrumentation and measurement solutions and complementary services for the 3550 kW / 3500 kVA load bank.

LBPI supervision software for monitoring your entire fleet of benches during testing;
On-site craneage on delivery and between test phases if necessary;
Permanent load-bed trailer installed on a semi-trailer for the duration of the tests, to make it easier to move the load-bed between tests;
125A generator and reservoir for auxiliary power supply if no 125A power supply is available on site during testing;
etc

The 3500 kW / 3550 kVA load bank with remote control

Rentaload offers LBPI supervision software for control, data logging and test report editing with the 3550 KW and 3500 kVA load bank.

LBPI supervision solution

LBPI software lets you control the entire fleet of connected load banks deployed on site, via a single computer. You can control up to 100 load banks at the same time, while mixing load bank types. For example, you can simultaneously control 15 300kW load banks in a cleanroom and a 3500kW containeur outside from a single PC.

You can also collect extremely accurate data such as P/U/I/DELTA T, during testing.

Supervision also means :

Programming of tests up to 72 hours (according to different scenarios);
Real-time plotting of supervision curves;
Recovery of thermal and electrical information from your tests;
Edition of test reports.

Choosing to supervise your fleet of Rentaload benches means above all..:

Save 20% of your testing time (up to 20% according to customer feedback);
Bring real added value to your tests. The data collected during the tests provide a real “vital map” of the data centre before its first commissioning.
Differentiate yourself from your competitors by enhancing this test phase and providing valuable data for the future management of the datacenter.